点击图片查看大图
重量： | 16（g） |
|---|---|
测量范围： | 0-32（V） |
产地： | 北京 |
电压测量误差： | 0.2 |
规格： | 1台 |
环境温度： | 常温（℃） |
类型： | 数字式电压测量仪表 |
售后服务： | 一年保修 |
输出电压： | 32（V） |
输入电压： | 220（V） |
外形尺寸： | 1（mm） |
发货期限： | 10天 |
品牌： | 盘羊仪器 |
型号： | LX-9830G |
加工定制： | 是 |
盘羊线束电压降测试仪热卖
适用范围：
该仪器适用于测量不可重接插头插销与连接插头引出线等类似接线
口的电压降,从而判断接线口优劣,也可检查插头线在完成标准规定的弯曲试验次数后的断线情况。
该仪器同时适用于测量开关触点、继电器、开关、线材线束、压接线端子、连接器等相关产品之电压降测试
本仪器有可调的大电流输出,微电压测试,数码管显示。满足标准：SAE/USCAR38 2009
盘羊线束电压降测试仪热卖
QC/T 730-2005 ;ISO 6722：2002 GB/T 2951—1997; GB/T 3048—1994 QC/T29106-2004; QC/T413-2002 ;QC/T413-2002;同时满足德国、法国、韩国、日本、等国家标准要求和测试规范，电压降实验按QC/T29106-2004标准5.7进行实验QC/T29106-2004标准：5.7端子与电线压接处的电压降实验按图2所示，在端子与电线压接处中间位置致电线75mm长的电线处（剥去绝缘层钎焊牢固）的两点间测量，扣除75mm长的电线电压降后即为端子与电线压接处的电压降。当一个端子同时连接两根或两根以上电线时对个根电线分别施加电流以测量电压降.
1.输入电压:AC220V+10%,50Hz
2.工作电流:DC0-40A/0-60A/0-100A任意可调(选购)
3.开路电压:DC0-12v/0-30v任意可调（选购）,精度0.1V
4.电压降范围:0~1000/999.9mV
5.电压表精度:±0.5%+4个半字 分辨率：0.1mv
6.电流表精度:±0.5%+3个半字 分辨率：0.1A
LX-9830G Constant current constant voltage drop detector
1.Outline：
High-precision adjustable constant current source system, with Chinese and English operation panel, high-precision digital millivolt table shows the pressure drop data, digital ammeter, the current adjustment knob, test port and an output port isolation, the start button and reset button control system , easy to operate, ergonomic design of the structure;
This model is divided into two models of AC and DC models, to meet the different requirements for different sample test current.
Choose to buy: DC models can use 0.2 standard shunt calibration, the instrument to solve the testing process because of inaccuracies in the test bias, to meet domestic and international standards of testing requirements for classes and harness connector products, but also for having characteristics of the product drop testing similar in the choice of current nature, the nature of the same current test current nature of the product itself should be used.
2.Scope：
2.1. Suitable for measuring non-reclosing plug plug plug the connector pinout similar connection port voltage drop, in order to determine the merits of the wiring port can also check the plug wire bending test times after the break to complete the standard case.
2.2.Suitable for measuring the voltage drop test of the switch contacts, relays, switches, wire harnesses, pressure terminals, connectors and other related products.
3.Meet the standards：
Meet the national standard and European countries standards and test specifications: QC / T 730; ISO 6722: 2002 GB / T 2951; GB / T 3048; QC / T29106; QC / T413; QC / T413-2002; SAE / USCAR38 2009.
3.main parameters：
3.1. power supply:AC220V+10%,50Hz
3.2. current:DC0-40A/0-60A/0-100A (Choose buy)，display：0.1A
3.3. Voltage:DC0-12v/0-30v (Choose buy), display：0.1V
3.4. Voltage drop:0~1000/999.9mV
3.5. Meter accuracy: ± 1% + 3 words
4. Optional DC models: 0.2 Standard Shunt 75mv self-calibration of the instrument
Specifications are as follows:
1) 10A, 75mv; 2) 40A, 75mv; 3) 60A, 75mv; 3) 100A, 75mv; (recommended more than two shunt calibration effect).
